Home > Cannot Access > Cannot Access Cisco Pdm

Cannot Access Cisco Pdm

If you use the Java Plug-in, the browser will prompt you for your username and password twice. To determine if your PIXFirewall unit is allowing your PC/workstation to access PDM, enter the show http command and check the output. Step 3 Check that your network cabling is correctly connected. A remote access VPN lets remote users securely access centralized network resources. his comment is here

Join Now We use Cisco Pix 506e firewall and well aware that we could access the PDM only through an older version of Java (assume 1.5.0.20 and beyond) with an old You may get a better answer to your question by starting a new discussion. For Microsoft Internet Explorer, on the Windows system, select Start > Run and type wjview in order to determine the version (or type wjview at the DOS prompt). Note Subsequent PDM loads will not show the certificate dialog box. view publisher site

If you change the password on the PIX Firewall unit, the browser might ask you to re-enter the password for authentication. With my Windows Update set to on, the IE8 browser is always the latest and a 3-4 years old java RE simply might not work. PDM starts after the certificates are accepted. Modify the year if necessary using this command.

In Internet Explorer, click Tools>Internet Options>Advanced. PDM is being run with a Java Plug-in that is not supported (PDM supports Java Plug-ins 1.3.1, 1.4.0, and 1.4.1). Tags: Cisco PIX 506eReview it: (2) Reply Subscribe RELATED TOPICS: Cisco Pix 501 PDM Fails to launch Invalid input detected at '^' marker. For Netscape 4.5.x or 4.7.x, you need to disable the Java Plug-in option if it is installed.

Make sure the Enable Java Plugin check box is cleared. This is normal. You need an older version of the JRE. Your PIXFirewall unit is allowing your PC/workstation to access PDM.

Join and Comment By clicking you are agreeing to Experts Exchange's Terms of Use. Enable password []: Clock (UTC): Year [2001]: Month [Dec]: Day [7]: Time [17:43:35]: Inside IP address [127.0.0.1]: 172.16.1.2 Inside network mask [255.255.255.255]: 255.255.255.0 Host name [pixfirewall]: Domain name: cisco.com Memory (MB)--Displays information about free, used and total memory in megabytes. The use of certain PIX Firewall CLI commands, and certain command combinations, limit access to the monitoring tab.

This is normal. http://www.cisco.com/en/US/docs/security/pix/pix60/pdm10/installation/guide/improve.html Step 4 If status lights are working or no status lights are present, access a command prompt in Windows, or use the UNIX or Linux command line to ping the PIX Why Does the Browser Ask Me to Accept the Security Certificate Again? For example, if the inside interface's IP address is 10.1.1.1, enter the following command to ping the PIXFirewall: ping 10.1.1.1 If the ping is unsuccessful or the response times out, there

Check that proxy is not enabled in the browser. this content If your PC does not have the required Java software, you can download it from the Sun web site . Assure that the PIX Firewall host name is in DNS. pixfirewall#show version Cisco Secure PIX Firewall Version 6.1(1) PIX Device Manager Version 1.1(2) Licensed Features: Failover: Enabled VPN-DES: Enabled VPN-3DES: Disabled If you are missing the lines that indicate your

The use of certain PIX Firewall CLI commands, and certain command combinations, limit access in PDM to the Monitoring tab. f. Cisco PIX Firewall Version 6.1(1) Cisco PIX Device Manager Version 1.0(2) . weblink If there is some question as to whether or not the clock was set properly at the time of the original connection, reset the clock as described in the previous step.

If you do not have a DES key and you are not a registered user, you can obtain a free key when you send an E-mail to [email protected] with the serial To determine if you have HTTP server enabled, enter the show http command and check the first line of the command output. How Do I Print My Configuration?

To determine if PDMVersion3.0 is installed on your PIXFirewall unit, enter the show version command and check the second line of the command output.

Click Next at the next New Site Certificate. Toolbox for IT My Home Topics People Companies Jobs White Paper Library Collaboration Tools Discussion Groups Blogs Follow Toolbox.com Toolbox for IT on Twitter Toolbox.com on Twitter Toolbox.com on Facebook Topics Click OK in the certificate dialog box. Each entry should be kept on an individual line.

Step 2 If status lights are working or no status lights are present, access a DOS command prompt in Windows, or use the UNIX or Linux command line to ping the If you are running Windows, and there is no DNS in your network or your DNS does not have the PIX Firewall entry, modify the "hosts" file. •On Windows NT, 2000, Accept the security certificates again. (If you change the host name or domain of the PIXFirewall unit, the browser asks you to accept the new security certificate.) Browser asks for the http://mediastartpage.com/cannot-access/dfs-not-working-over-cisco-vpn.html You can increase your RAM by closing other applications.

The domain name used in the setup can be the name of your domain or any arbitrarily chosen string in the form of that you use for key generation; name If you cannot connect, enter the show version command to check that you have the proper activation key to use DES or 3DES. If you are connecting a workstation directly to the PIX Firewall unit's Ethernet interface, either use a cross-over cable or add a hub or switch between your computer and the PIX Join & Ask a Question Need Help in Real-Time?

Close and restart your browser. Step4 When you have completed all the wizard pages, the Startup Wizard Completed page displays.

© Copyright 2017 mediastartpage.com. All rights reserved.